Metal baling machine is a relatively simple metal baling machine, which only needs enough pressure to press large scrap metal into blocks.As the working environment of metal baler is dirty and dusty, it pollutes the equipment.In order to improve the service life of the equipment, we will introduce how to maintain the scrap metal baler.
1. Before applying the Hydraulic oil with 150-200 mesh, the Hydraulic oil should be filtered by metal mesh, and the oil should be inspected regularly; in case of shortage, the oil should be added immediately;
2. The oil tank shall be cleaned out and replaced with new oil once every half a year, but the first cleaning of filtered oil shall not exceed one month. New oil used once shall be allowed to be used again after strict filtration.
3. Place requiring lubrication shall be inspected on a regular basis and maintained in accordance with the operation instructions.
4. Check the equipment frequently for oil leakage and tighten, wipe or replace the oil seal if any leakage is found;
5. After work every day, the material box should be cleaned and the appearance of the equipment should be clean. Dust and debris of hydraulic devices on each sliding surface should be removed;
6. Check the range of value indicated by each instrument; if the value indicated by the instrument is abnormal, replace it;
7. No unauthorized use of the machine without training and understanding of the structure, performance and operating procedures of the machine;
8. In case of abnormal vibration or abnormal phenomena of the equipment during operation, it shall immediately stop the equipment, analyze the causes of analysis and troubleshoot faults, and do not forcibly operate with faults;
9. When the equipment is running, the heating condition shall be checked immediately. If the motor bearing or dian ci valve is unusually hot, it shall be repaired or replaced;
10. During the operation or packing process , the machine shall not be repaired or touch the sport part. It is forbidden to press the material in the material box with hands or feet;
11. The adjustment of Hydraulic pumps, valves and pressure meters should be carried out by experienced technical workers. If any malfunction of the pressure gauge is found, the Hydraulic pumps, valves and pressure meters should be checked, repaired or replaced immediately;
12. Check if the oil filter is blocked, and remove the parts (machine part) for cleaning if it is blocked;
13. When the oil temperature rises during the operation of the equipment, it should be cooled immediately and simply to check whether the equipment is in fault.
Hydraulic baling machine is mainly used in steel mills, recycling and processing industry and non-ferrous metal smelting industry.The hydraulic baler can extrude all kinds of metal scraps into cuboid, octagonal shape, cylinder and other qualified furnace materials, which can reduce the transportation and smelting cost and increase the furnace throwing speed.Only good maintenance can improve the service life of metal baler.